When you are using a wireless network, there are many factors that can lower the range. But, you can actually boost signal strength through the method listed below.
Check for interference
Use a wireless network analyzer to track interference sources. The problem may either be through neighboring networks or electronic devices you may be using inside the organization. Think about a replacement if network traffic interferes with the frequency range. Moving forwards, compare power delivery when every device is on and off. This would help you determine the reasons why devices aren’t receiving excellent signal.
Switch channels
Routers deliver a better performance with channels ranging between one and eleven. Adjust to a channel that would allow the device to offer clear signal across a wireless network. Think about using a software utility to analyze networks. Configure the system accordingly once you have identified the unused channel.
Upgrade the device
Change the Xmit power of the router after you avail a wireless broadband connection. While you increase the power to 50mW, make sure you don’t exceed the limit. There’s always a risk of overheating and the router getting damaged. You can also attach a wireless bi-directional amplifier. This would help you increase signal strength and boost outbound and inward speed.
Reposition the router
Seek a new place for your router. Ideally, the location should be somewhere at the center. Keep the device away from cabinets, and shelves. For effective range, place the router near to the ceiling.
Use 802.11n
Always switch to new 802.11n standards. Once you have changed the router’s network broadcast mode, you can work on a signal strength and greater range as compared to 802.11a/b/g.
If you want more details on fast wireless broadband plans, visit the website.
Visit wireless internet packages blog: - http://highspeedinternetblog.aircus.com/
No comments:
Post a Comment